Home » EMERGENCY » LED POWER PACK » EMERGENCY KIT FOR DC LED LAMPS » EMERGENCY KIT FOR LED LAMP FITTING
1. Reverse charging is not acceptable.
2. Charge before use. The battery is delivered in an half-charged state.
3. Do not short circuit the battery.
4. Do not incinerate or mutilate the battery.
5. Do not solder directly to the battery.
6. The life expectancy may be reduced if the battery is subjected adverse conditions like: extreme temperature, deep cycling, excessive over-charge/over-discharge.
7. Store the battery in a cool dry place.
8. Warning: Lsw (Switched Supply), Lun-sw (Un-switched Supply) and N as marked, not interchangeable and must be of the same phase as ELCB.
TECHNICAL INFORMATION – THÔNG SỐ KỸ THUẬT
Input voltageSingle phase AC 100-240V
Output voltageDC 10-80V
Charge time24 hours
Dimension of inverter29x40x206mm
Dimension of batterCustomized
Light sourceMax 100W LED Light with Internal or External Driver
Emergency powerMax 6W
Indicator lightRed for Charging/Green for Power/Yellow for Trouble
Test facilityPush botton switch
ConstructionFireproof Polycarbonate (PC) housing
ComplianceEN 61000-6-3 : 2001 61000-6-1 : 2001; CE; RoHS